SQL Server 2008 R2 Error 926 – How to Fix this Error Message?

Microsoft SQL Server is a popular relational database management system provided by Microsoft. It offers you great features like no other database tool does. Since how long have you been using MS SQL Server? You must be impressed by the unmatched features SQL Server does have. But do you know SQL Server has some major drawbacks? What major problem have you ever encountered while using MS SQL Server and how did you deal with it? While using SQL Server, it often happens that you confront an error message. In this blog post, I’ll show you why SQL Server 2008 R2 Error 926 occurs and how you can fix it with ease.

Last week, I found a post on Microsoft Discussion site. The user, who has posted that question, was dealing with SQL Server 2008 R2 Error 926.

In the very same thread, I found many other users were also telling that they’re facing the same problem. After that, I searched the same issue on Google and found that many people are confronting this error message. I thought I should try to fix SQL Server 2008 R2 Error 926 so that other SQL users don’t face this error message for long.

SQL Server 2008 R2 Error 926

Error messages are always annoying. If you come across an error message while using MS SQL Server, this will turn into a moment of frustration for sure. One such error message is SQL Server 2008 R2 Error 926. It’s one of the worst error messages in the history of Microsoft SQL Server. Confronting this error message is not less than a nightmare for any SQL user. It makes you unable to access the data and information from the MDF database. Whenever you try to make queries from the new window in order to get the output, you receive this error message repeatedly:

How to Fix SQL Server 2008 R2 Error 926?

There are some basic solutions which you can try here to fix this SQL Server 2008 R2 Error 926. Just have a look:

  • First, refresh the Microsoft SQL Server connection. Sometimes this little thing can resolve your issue.
  • Disconnect the Microsoft SQL Server connection. After a few seconds or minutes, reconnect it.
  • You should try restarting the service forMSSQLSERVER.
  • Restart the Microsoft SQL Server Management Studio.
  • The last thing you can try is to restart the computer system.

These are some basic things you can try at your end. But if none of the above tricks works, you should definitely try some advanced solutions. Where the basic solutions may fail or not work, the advanced solutions must help you. Generally, there are three different manual tricks you can try here to fix SQL Server 2008 R2 Error 926. First, log into the SQL account as system administrator (SA) and try any of the manual solutions shared below:

Solution #1
The best thing you can try here is rebuilding the system database. It’s very helpful to fix corruption problems in the master, model, MSDB or resource system database. Also, it helps you modify the default server-level collation. You can refer to this article to know how to rebuild the system database.

Solution #2

  • First of all, open the new window to execute the query.
  • Now type the following commands:

EXEC sp_resetstatus ‘DB’_Name;

 The above command is used to turn off the suspect flag on a database. It updates the status and mode of columns which are named as sys.databases in the particular database.

ALTER DATABASE DB_Name SET EMERGENCY;

 Through this command, the database set on EMERGENCY mode becomes a READ_ONLY.

DBCC CHECKDB (‘DB_Name’);

 This command will check the integrity of all the database objects.

ALTER DATABASE DB_Name SET SINGLE_USER WITH ROLLBACK IMMEDIATE;
Via this command, you can set up the database to single user mode.
DBCC CHECKDB (‘DB_Name’, REPAIR_ALLOW_DATA_LOSS);

 This command plays an important role here. It’ll repair all the errors in SQL Server 2008 R2.

ALTER DATABASE DB_Name SET MULTI_USER;

 The above command will set the multi user mode in the SQL Server database. It’ll allow multiple users access the database file.

Solution #3

  • First of all, open the Object Explorer. Right-click the database in the tree-structure, and click Stop in the options.
  • Now go to the Control Panel>Administrative Tools>Services.
  • On the Services section, find SQL Server (MSSQLSERVER) in the list. Right-click it and click Stop in the options.
  • Now browse to this location:
  • C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA
  • In this step, you need to move the MDF and MSDBlog.ldf to any other folder or place.
  • Now copy the files (you’ve moved in the earlier step) from the new location and paste them to the old.
  • Go back to the Object Explorer window where the connection is still open. Now right-click the blank space, and this time click Start in the options.
  • Now you need to refresh the database file.
  • This will start executing the process to detach the MSDB file.

Download Now

Professional Solution

If the above manual solutions don’t help you fix SQL Server 2008 R2 Error 926, you should look forward to a professional solution. SQL Database Recovery software is recommended by professionals and data recovery experts to handle SQL Server corruption with ease. It can repair SQL database and successfully restore SQL database objects from it. The file objects include tables, views, store procedure, programmability, triggers, default,functions, etc. Whatever you recover from the corrupt SQL database, you can save them into a new database. This amazing recovery solution can fix all the major errors which lead to corruption in the MDF database.

Know how to recover SQL Database from suspect mode?

If you want to recover SQL Database from suspect mode.  Then let me tell you are at the right place. With this blog, you will get to know the simple method  to recover SQL Database from suspect mode. Its very common scenario when SQL Server database go into suspect mode which leads SQL database into a big trouble. Due to which you cannot work on the database as database go into suspect mode. As primary file group get damaged and database fails to recover during the start of SQL Server. Then you have to repair the database, because there is no other option left to rebuilt the database and carry on transactions. Let us check how to get rid of the issues raised by getting suspect database in MS SQL.

Reasons why SQL database is marked as Suspect

  • When user couldn’t find the file specified during the creation or opening of the physical device.
  • The system failed to open the device where the data or the log file resides.
  • Lack of Disk Space.
  • Improper shut down of database server also lead SQL database in suspect mode.
  • Corruption in the transactions log due to SQL server crash or when SQL server restarts in the middle of a transaction.
  • Due to the installed antivirus users cannot access data or log file.
  • When SQL does not complete a rollback operation or roll forward operation.
  • Log files or data files have got damaged.
    Inability of SQL to complete rollback operation or roll forward operation

Check out the Steps to recover SQL Server Database Suspect Mode Error

Make sure you don’t miss any step otherwise it may get difficuilt resolve the error “SQL database in suspect mode”

Step 1
At first, Turn off the suspect flag on the database and set that it to EMERGENCY Mode
EXEC sp_resetstatus ‘db_name’;
ALTER DATABASE db_name SET EMERGENCY

Step 2)
Execute a consistency check on the master database
DBCC CHECKDB (‘database_name’)

Step 3)
Now Bring your database into the Single User mode and roll back the previous transactions
ALTER DATABASE database_name SET SINGLE_USER WITH ROLLBACK IMMEDIATE

Step 4)
Then take backup of the complete database
Now Attempt the Database Repair allowing some data loss
DBCC CheckDB (‘database_name’, REPAIR_ALLOW_DATA_LOSS)

Step 5)
Bring the database into the Multi-User mode
ALTER DATABASE database_name SET MULTI_USER

Step 6)
At last refresh the database server and verify the connectivity of database.
Ideally, after these steps have been executed, users should be able to connect to the database smoothly. In the case of any data loss, you’ll have the database backup to restore from (step 4).

If you follow above steps carefully you can easily recover SQL Database from suspect mode. Moreover, it is always advisable to run DBCC CHECKDB command regularly to give a check for physical and logical integrity of the database.

Download Now

And also clean the database from fresh and updated backup that you have prepared before the suspect problem occurs. It is the quite quick and best method to recover SQL Database from suspect mode
When you do not have a most recent backup of database or backup is corrupt itself and database have been marked as ‘SUSPECT’.  In that scenario, best solution solution is to use SQL Database Recovery Tool that is especially designed to recover database from the suspect mode, as well as repair damaged corrupt MS SQL Server database files.

How to Repair Corrupt MS Access 2007 Database ?

With this blog you will know the easy way to repair MS Access Database. This blog doesnot  explains How to Repair Corrupt MS Access 2007 Database but also outlines reasons that make Ms Access 2007 database files corrupt. It also summarizes the basics of Microsoft Access.

repair corrupt ms Access 2007 database

What is Microsoft access ?

Microsoft Access is a most important member of the Microsoft Office suite of applications. Microsoft Access is nothing but a database management system (DBMS) from Microsoft which allow users  to create and maintain the database in MS ACESSS.

Microsoft Access basically saves data in its own format which is  based on the Access Jet Database Engine. Through  MS Access database  users can also import or  link directly to data stored in some other applications and databases. By using the MS Access, you can easily create tables, keys, queries , forms and reports

There are two formats in which you can save your Access file:

  • Microsoft Access Database/MDB (.mdb) – MS Access 2003 and its preceding  version use this MDB format to store  Access file.
  • Access Database/ACCDB (.accdb) – MS Access 2007 and its later versions use this ACCDB format to store  Access file. This new file format allows you to save file attachments. You cannot view ACCDB file in MS Access 2003 or its preceding versions.

If the size is larger than, or equal to MS Access database 2007,then  all the objects in an MS Access database are saved in the Jet .mdb or Ace .accdb format.

Reasons of MS Access Database file corruption :

  • Sometimes your access database file can get corrupted or damaged due to numerous reasons such as
  • Faulty networking hardware,
  • Hard disk drive failure,
  • Opening or saving the access file in other format,
  • Virus attacks,
  •  Interruption in writing operation,
  • Abrupt system shutdown
  • Your Access file is also corrupted if you are unable to open any of the objects in the database or unable to read records.

But now you don’t have to worry about your corrupted and inaccessible file. This blog will explain How to Repair Corrupt MS Access 2007 Database in simple few steps

Check out multiple methods to fix Repair Corrupt MS Access 2007 Database: 

Fix 1- Restore from Backup

The best and the most used method to recover your access database to restore the database from the backup. Since backup always act as magic stick to get your data back during minor and major corruption issues. It is always recommended to frequently take backup of ACCDB and MDB files.

Fix 2- USE Integrated Compact Utility

MS Access database consist of built-in JET Compact Utility , which help users to resolve minor corruption issues in Access.

Note: Although this free utility helps to fix low damage, it does not help to recover extreme Access errors

Fix 3- Deleting LDB File

When users open the database, the Jet database engine auto creates an LDB file. By deleting this file user can repair access 2007 database

Fix 4- By Removing Compiled VBA Code

By removing the existing VBA Codes from Access database users can repair access database.

Use the following command to remove Compiled VBA Code

“C:\Program Files\Microsoft Office\Office\MsAccess.exe /decompile”

“C:\DatabasePath\FileName.mdb”

Note: If the MSAccess.exe file is stored to the different location (than default), then you you have to change the file path mentioned in the above command.

Fix 5-By Exporting Database to Access 2013\ 2010

You can also repair ms access database by exporting Access 2007 database to any updated version MS Access such as  MS access 2010 or 2013. There is high chances that by By Exporting Database to Access 2013\ 2010

User can  rectify the issue and make the .accdb file accessible.

To know how to convert Access database file to access 2013 version check out the below methods

  1. Open the database, click on the Filetab to select Backstage View and then select Save Asoption
  2. In the appeared Save Asdialog box, select Access database (*.accdb) under Save Database Assection
  3. Browse and select the location where the newer ACCDB file needs to be stored
  4. Provide appropriate name for the new database file and then click on OKbutton

With this, all the contents from Access 2007 will be transferred to Access 2013 or 2010 version; however, you will not be able to view this file in the older versions of the application prior to the 2007 edition.

If incorrectly linked tables exist within the database file, it is quite difficult to convert and view Access DB in any newer version.

Download Now

There are many high- end tools available for you to recover your damaged Access database file .The most effective tool for repairing your damaged access file in MS Access  is an  MS Access Database Recovery  tool.  It smartly minimizes the size of the database file as the large sized file is also one of the main reasons for corruption. You must create a backup of those database files which you want to compact. It performs flawless Access Recovery in just few click of a mouse and recovers your crucial data from corrupted MS Access database files.